DESCRIPTION
I). Premix Alkali-Resistant Chopped Strands -- (ZrO2 14.5% / 16.7%)
Premix chopped strands is a high alkali resistant glass fiber chopped strand for general use intended for premixing with other materials and is produced by the use of tamping casting or other processes in a molded GRC part.
Even under high-dose conditions is also very easy to integrate, and after mixing a good cluster. For the production of standard GRC components such as water pipes or instrument boxes, or building facilities such as lightweight partition boards, zirconia content of 16.7% chopped yarn production components of the late strength of the performance better
II). Low TEX Alkali-Resistant Chopped Strands -- (ZrO2 14.5% / 16.7%)
Low Tex chopped strands is a high Intergrity, low tex, alkali-resistant, glass-fiber chopped strand for molding GRC components in dry mix systems or other premixing processes. It can also be used for the production of prefabricated components in standard GRC components.
The specially formulated wetting agent system makes it easy to blend and maintain good integrity during mixing, effectively preventing wear and maintaining the bundling properties when mixed with dry materials. The yarns with low single-strand density can increase the specific surface area with low participation, and thus produce stronger enhancement effect. The product is particularly suitable for preparing pre-made mortar and paint mixes.
III). Water dispersed Alkali-Resistant Chopped Strands -- (ZrO2 14.5% / 16.7%)
water dispersed chopped strands is a special purpose alkali-resistant glass fiber chopped strand, used for mixing with cement and other materials that require high dispersion. Especially for the special mud mud mixture of dressing or for mortar fluidity and other special industrial production.
The product's sizing agent system is water-dispersible and, when mixed with water, can be sufficiently dispersed into monofilaments. Used in the painting and concrete repair mixture, and through a special process to produce a certain standard GRC components.
Product Properties:
1) Excellent alkali resistant and durability
2) Highest integrity during mix
3) Good stiffness
4) Good fluidity
5) Be compatible with concrete slurry
6) Been Tested in Sheffied University,UK
Fiberglass Chopped Strands including Chopped Strands For BMC, Chopped Strands For Thermoplastics, Wet Chopped Strands, Alkali-Resistant Chopped Strands(ZrO2 14.5% / 16.7%).
Get Sample & Quotation
PRODUCT INFORMATION
Technical Characteristics |
Tex of strand(tex) | Sizing content(%) | Moisture(%) |
BH/T572-2002 | BH/T572-2002 | BH/T572-2002 |
98±10 | 1.6±0.2 | ≤0.2 |
Products Available |
Product | Strand length available(mm) | Packing specification (mm) | Net weight(kg) |
ARC15-98-XmmL(H) | 6,8,12,16
20,24,28,32 | 550×550×65 | 15 |
RELATED CATEGORIES
View Related Categories
3D Fiberglass Woven Fabric
Fiberglass Direct Roving
Fiberglass Assembled Roving
AR Fiberglass Roving
Fiberglass Chopped Strands for Thermoplastics
Fiberglass Chopped Strands for BMC
Milled Fiberglass Powder
Fiberglass Stitched Combo Mat
Fiberglass Chopped Strand Mat
Woven Roving
Fiberglass Tissue Mat
Fiberglass Needled Mat
Fiberglass Thermoplastic Item
FRP Products
SMC Products
Shipping & Storage
AR Glassfibre roving pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15℃- 35℃ & relative humidity between 35%- 65%.If stored below 15℃, it is advisable to hold in workshop for 24 hours to prevent condensation before use.
Packaging
1) Each pallet has 14 levels ,4 bags /level,totally 56 polythene bag;
2) The complete pallet is enclosed in polythene and identified with two labels.
Product | Pallet |
Length(mm) | width(mm) | Height(mm) | Net weight(kg) |
ARC15-98-XmmL(H) | 1130 | 1130 | 1100 | 840 |
Application
The 'Premix' production technique involves pouring or pumping a cement/fibre mix into a mould, similar to other precast production processes. The mix is compacted using vibration or by adding other components to the mix. The unit is left in mould to set and demoulded the following day. Pre-mix has the advantages that moulds can be simper to produce and strip.
FAQ
1.Moq:1000kgs
2.Delivery time:15days after confirm order
3.Payment term:T/T 30% deposit in advance,70% balance before shipment date.
